` Challenges | WDP & Associates

Challenges

Buildings
Infrastructure
Subsurface
Litigation / Insurance Claims Support
Do you need assistance with catastrophic water or wind damage and/or leakage following a significant weather event?
Do you have a problem with your post-tensioned structure, such as failed strands or anchorages, corroding strands, or broken wires?
Does your post-tensioned parking structure or bridge have corroding or exposed reinforcing steel?
Are you sure your masonry wall is grouted and reinforced?
Is your concrete structure deteriorating and showing signs of distress, such as concrete cracking or spalling?
Are you seeking to avoid a problem you experienced with a previous building envelope?
Has your building been damaged by wind, snow, flood, or an earthquake?
Does your structure or facility need a comprehensive condition assessment?
Does your project require building envelope quality assurance testing or building enclosure commissioning?
Is your slope or retaining wall failing?
Are efflorescence or unsightly stains marring your building?
Would your structure benefit from pre-event risk assessments to better withstand natural hazards?
Do you need assistance determining the cause and/or responsibility for a failure in a structural or non-structural building assembly?
Is your façade failing due to weathering or other causes?
Are you receiving your inspections reports in a timely manner?
Is your occupancy permit at risk of delay due to unresolved construction deficiencies?
Is your building showing signs of settlement?
Are the inspectors on your project site competent and properly certified?
Is your current project of a type you are not overly familiar with or one that requires enhanced detailing due to local requirements or unique situations?
Have your past projects been plagued with site cost overruns?
Have construction document inconsistencies led to confusion and possible cost overruns?
A failure has occurred, and a solution is needed
Does your building leak? Do you want to know why and how to correct it?
Are you dealing with a product defect issue?
Do you have unknown conditions to verify?
Do you have questions concerning in-place concrete strength?